Showing 33–40 of 51 results
Multiple circuit formation rectifier for initial charge and discharge of lead-acid batteries
Stress tests are performed immediately after formation using Digatron’s production line tester. Thanks to an automated set value test, only flawless car and truck batteries leave the assembly line, and with a throughput of up to eight batteries per minute, the device is highly efficient. A must-have if you want your batteries to be of the highest quality
Pouch Forming Unit (PFU)
ADOR Digatron PFU, Pouch Forming Unit, is an automatic blister pouch forming machine, designed for the production of lithium cells. Pouch film unwinding, forming and cutting into single blisters are performed automatically.
Pouch Sealing Unit (PSU)
ADOR Digatron PSU, Pouch Sealing Unit, is an automatic pouch cell heat-sealing machine designed for the production of lithium cells. The machine is designed to heat-seal the cell on three sides, leaving the gas pouch side open for the next filling step.
Redundant monitoring unit for defined limit values to reduce damage on the DUT
Ador Digatron’s formation rectifiers are devices for the initial charge – and optionally for the discharge – of lead-acid batteries. They have already proven their worth in thousands of installations through their flawless quality and reliability. Depending on your requirements, we supply the device with typical thyristor technology, as IGBT, for solderless formations, or in the cutting-edge energy-saving version with SiC MOSFET technology. The rectifiers come with a current range of 20 amps to 3,200 amps per circuit and capacities of up to 320 batteries or up to 80 tanks as TCR.
Sheet Stacking Unit (SSU)
ADOR Digatron SSU, Sheet Stacking Unit, is an automatic cell stacking machine, designed for the production of lithium cells. The operator manually loads the machine with one anode tray and one cathode tray and starts the automatic cycle.
Tab Welding Unit (TWU)
ADOR Digatron TWU, Tab Welding Unit, is an automatic electrode tab ultrasonic welding machine, designed for the production of lithium cells. It is designed to trim the current collectors of the electrodes, weld them together and connect them to the cell tabs using an ultrasonic welding system.