Description
Custom cable for connecting the test object to the Digatron device
More Products
-
Cell Degassing Unit (CDU)
Read moreADOR Digatron CDU, Cell Degassing Unit, is an automatic pouch cell degassing machine, designed for the production of lithium cells. The machine is designed to evacuate the gas from the cell, generated during the formation process.
-
High Current Cable
Read moreTypically, this highly flexible copper cable is used with a Digatron high-current discharge device (HEW series), a Digatron battery emulator (BE series) and the Digatron electric vehicle tester (EVT series).
-
IGBT
Read moreAdor Digatron’s formation rectifiers are devices for the initial charge – and optionally for the discharge – of lead-acid batteries. They have already proven their worth in thousands of installations through their flawless quality and reliability. Depending on your requirements, we supply the device with typical thyristor technology, as IGBT, for solderless formations, or in the cutting-edge energy-saving version with SiC MOSFET technology. The rectifiers come with a current range of 20 amps to 3,200 amps per circuit and capacities of up to 320 batteries or up to 80 tanks as TCR.
-
AXIAL TAB POUCH CELL CARTRIDGE TRP 024-010
Read moreThis cartridge is designed to connect up to 24 pouch cells, with both tabs located on the same side of the cell, to perform formation or test.
-
Pouch Sealing Unit (PSU)
Read moreADOR Digatron PSU, Pouch Sealing Unit, is an automatic pouch cell heat-sealing machine designed for the production of lithium cells. The machine is designed to heat-seal the cell on three sides, leaving the gas pouch side open for the next filling step.
-
Cell Filling Unit (CFU)
Read moreADOR Digatron CFU, Cell Filling Unit, is an automatic pouch cell filling machine, designed for the production of lithium cells. The machine is designed to fill pouch type of cell and it performs high precision electrolyte dispensing and cell sealing under vacuum.
-
Waterbath
Read moreWater bath for temperature equalization during test phases
-
CYLINDRICAL CELL CARTRIDGE TRC 024-010
Read moreThis cartridge is designed to connect up to 24 cylindrical cells to perform formation or test.
The contacting system is composed of spring-loaded pins for current flow, voltage control and an additional pin that can optionally detects the temperature of the current collector. -
Z-Fold Stacking Unit (ZSU)
Read moreADOR Digatron ZSU, Z-Fold Stacking Unit, is an automatic electrode stacking and separator folding machine, designed for the production of lithium cells. The operator manually loads the machine with anode and cathode electrodes, stored in specifically designed trays that bring them to the exact pick up position and starts the automatic cycle.
-
CELL FILLING UNIT (CFU-EX)
Read moreADOR Digatron CFU-EX, Cell Filling Unit, is an automatic pouch cell filling machine, designed to work externally from a dry room. The machine is designed to perform electrolyte dispensing and sealing of pouch cells under vacuum, in an oxygen free controlled environment.
Reviews
There are no reviews yet.